Works with your software.
iSuni sensors and cameras work inside the imaging program your clinic already uses. Find yours below, or ask us to check it.
- Direct integration
- Works through TWAIN
Imaging programs
| Imaging program | Intraoral sensorSensor | Intraoral cameraCamera |
|---|---|---|
| Direct integration with closed imaging systems | ||
DEXIS 9: Setup | Works, direct integrationDirect | Works |
DEXIS 10: Setup | Works, direct integrationDirect | Works |
Carestream Dental (Kodak): Setup | Works, direct integrationDirect | Works |
Sidexis 4 | Works, direct integrationDirect | Works |
Schick CDR DICOM | Works, direct integrationDirect | Works |
| Every program that supports TWAIN | ||
| Works through TWAINTWAIN | Works | |
Eaglesoft: Setup | Works through TWAINTWAIN | Works |
Open Dental: Setup | Works through TWAINTWAIN | Works |
Curve Dental: Setup | Works through TWAINTWAIN | Works |
| Works through TWAINTWAIN | Works | |
DentiMax: Setup | Works through TWAINTWAIN | Works |
VixWin: Setup | Works through TWAINTWAIN | Works |
| Works through TWAINTWAIN | Works | |
| Works through TWAINTWAIN | Works | |
| Works through TWAINTWAIN | Works | |
TigerView: Setup | Works through TWAINTWAIN | Works |
Centaur Media Suite: Setup | Works through TWAINTWAIN | Works |
Akitu One: Setup | Works through TWAINTWAIN | Works |
Apixia: Setup | Works through TWAINTWAIN | Works |
CADI: Setup | Works through TWAINTWAIN | Works |
EVAsoft: Setup | Works through TWAINTWAIN | Works |
EzDent-i: Setup | Works through TWAINTWAIN | Works |
Oryx: Setup | Works through TWAINTWAIN | Works |
| Works through TWAINTWAIN | Works | |
“” isn’t on our list yet. It may well work: most imaging programs accept a TWAIN source. Ask us and we’ll check.
Check my software…and many more: any other program that acquires from a 32-bit TWAIN source. The camera also works in iSuni Imaging.
All third-party trademarks and logos shown are the property of their respective owners.
3D scanner: works with your lab.
The iSuni scanning software sends cases through the cloud, or exports open STL, PLY and OBJ files for any lab, CAD or printing workflow. No subscription.
All third-party trademarks and logos shown are the property of their respective owners.
Check my software
Tell us your imaging program and version. We’ll confirm it works with the iSuni products you’re considering before you buy.
Thanks, we have it.
We’ll reply to once we’ve checked your software.
Meanwhile: Browse products · Read the buyer guides
Any TWAIN program: four steps
For every program on the TWAIN list, setup is the same. Do it yourself, or with a trained iSuni technician in the free remote installation session that comes with each qualifying purchase, for up to six computers.
Step 1: Install the iSuni driver
Run the iSuni sensor setup as an administrator on each Windows 10 or 11 computer that takes X-rays. Leave its one option, the status icon at login, switched on.
Step 2: Plug in the sensor
Its calibration is found by itself. Until it is in place, the capture window says CALIBRATION NEEDED.
Step 3: Choose the iSuni source in your imaging program
In your imaging program, choose iSuni Intraoral Sensor as the TWAIN source. While the sensor is plugged in, the iSuni driver keeps it the default TWAIN source, and puts the previous one back when you unplug it.
Step 4: Take X-rays
Open the iSuni source from your imaging program: the capture window opens. Expose when it says Ready for exposure. Single sends each X-ray as soon as it is ready; Series keeps them in a strip until Upload.



























