Rounded, chamfered edges: Softer edges all the way round, for patient comfort and easier positioning.
4.5 mm thin: The flat sensor plate is 4.5 mm, front to back. The housing on the back guides the cable.
3 m reinforced cable: Pull-tested to 100 N, with the electronics in the USB-A plug: no separate box along the cable.
Sealed to IP67: The sensor head and its housing are one sealed piece. Wipe the head and cable with 70% isopropyl alcohol; keep the USB plug dry.
Four sizes: Sizes 0, 1, 1.5 and 2, shown to scale.
Showing
Size 2
Outside
31.0 × 45.0 × 4.5 mm
Active area
26 × 36 mm
Image
1300 × 1800 pixels
All four sensor sizes
Size
Outside (mm)
Active area
Pixels
0
23.4 × 33.6 × 4.5
18 × 24 mm
900 × 1200
1
25.0 × 38.5 × 4.5
20 × 30 mm
1000 × 1500
1.5
29.2 × 42.5 × 4.5
24 × 33 mm
1200 × 1650
2
31.0 × 45.0 × 4.5
26 × 36 mm
1300 × 1800
The iSuni Sensor is a digital intraoral X-ray sensor on a direct USB connection. Choose a size for your patient and keep working in your TWAIN imaging software.
Straight to USB and the iSuni TWAIN driver, which appears as a standard source in your imaging program. Check your software
iSuni sensorDirect USB
TWAIN driver
9Direct integration
10Direct integration
KodakDirect integration
Sidexis 4Direct integration
Schick CDRDirect integration
Romexis
Apteryx
All third-party trademarks and logos shown are the property of their respective owners.
Specifications
Use a new barrier sheath for every patient. Wipe the sensor head and cable with 70% isopropyl alcohol, keep the USB plug dry, and never soak, autoclave or heat-sterilize the sensor. Read the sensor care routine.
Detector
CMOS with a directly deposited CsI scintillator
Pixel pitch
20 µm
Spatial resolution
20 lp/mm measured (25 lp/mm theoretical, from the 20 µm pixel)
Grey levels
16-bit (65,536 levels)
Connection
Direct USB 2.0; the electronics sit in the USB-A plug, with no separate box along the cable
Thickness
4.5 mm
Cable
3 m, reinforced and pull-tested to 100 N
Housing
Rounded, chamfered edges; sensor head and cable sealed to IP67
X-ray generator
55 to 100 kV
Available sizes
0, 1, 1.5 and 2
Warranty
24 months; see warranty terms
Regulatory and qualityHealth Canada · medical device registrationFDA 510(k) · U.S. Food and Drug AdministrationISO 13485:2016 · quality system certificationMDSAP · quality system audit program
Sizes
Size
Active image area
Image dimensions
Outside dimensions
Size 0
18 × 24 mm
900 × 1200 pixels
23.4 × 33.6 × 4.5 mm
Size 1
20 × 30 mm
1000 × 1500 pixels
25.0 × 38.5 × 4.5 mm
Size 1.5
24 × 33 mm
1200 × 1650 pixels
29.2 × 42.5 × 4.5 mm
Size 2
26 × 36 mm
1300 × 1800 pixels
31.0 × 45.0 × 4.5 mm
Swipe the table sideways to compare every model.
Get the spec sheet.
Every specification of the iSuni intraoral sensor on one printable page, to share with your team.
iSuni intraoral sensor in your chosen size, with its 3 m cable
iSuni TWAIN driver and calibration for your sensor
One free remote installation session with an iSuni technician, for up to six computers
14day money-back guarantee
Try an iSuni sensor in your own clinic.
Use it on your own patients, in the imaging software you already have. If it isn’t right for your practice, return it within 14 days after installation for a refund.
Set it up yourself, or use the free remote installation session with an iSuni technician
The iSuni TWAIN driver appears as a standard source in Dentrix, Eaglesoft, Open Dental, DEXIS, Carestream and any program that supports TWAIN, so your team keeps the workflow it knows.
What do I need on the computer?
A Windows computer with a free USB port. The electronics are in the USB plug, so there is no separate box on the cable.
How do I clean it between patients?
Use a new barrier sheath for every patient and wipe the head and cable with 70% isopropyl alcohol. Keep the USB plug dry. The sensor care page has the full routine.
What warranty does it have?
Every iSuni sensor is covered for 24 months, starting when your 14-day window after installation ends. See the warranty page for details.
Who installs it?
You can install it yourself, in a few steps. If you’d rather not, one free remote installation session with a trained iSuni technician comes with each qualifying purchase, for up to six computers: they make sure the sensor works with everything your clinic needs.
Can I try it first?
Yes. iSuni sensors come with a 14-day money-back guarantee that starts once the sensor is installed, so you can use one on your own patients before you decide.
Where is the official iSuni Sensor site?
You are on it. isuni.ca is iSuni’s own site, with the iSuni TWAIN driver, manuals, warranty terms and support for every iSuni Sensor, wherever you bought it.
Ready for a quote?
Size 0
$2,399Regular price $2,999Save 20%
Size 1
$2,899Regular price $3,199Save 9%
Size 1.5
$2,999Regular price $3,399Save 11%
Size 2
$3,399Regular price $3,899Save 12%
Buying for several rooms, or through your dealer? Tell us about your clinic and we’ll reply with a quote and compatibility notes.